Shop

Star Mold
Silicone Flower Mold – Embed
March 8, 2019
Star Mold
Silicone Star Mold – Embed
March 8, 2019
Show all

Silicone Seashore Mold – Embed

$3.25

Ten different designs including a palm tree, sun, fish, crab, starfish, shells, and more!

Helpful Product Information:

Style: Bar Avg. Bar Weight: 0.5 oz
Bar Cavities: 30 Bar Depth: 0.55″
Bar Length: 1.5″ Bar Width: 1.75″
Max Temperature: 500ºF Mold Capacity (oz): 15

In stock

Compare

Directions:
Melt & Pour Soap: Pour melted soap into silicone mold cavities. Allow soap to cool at room temperature until hard. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.

Cold Process Soap: Pour soap at trace into the mold cavities. After at least 24 hours, gently pull silicone mold to loosen its grip on the soap. Flip mold over onto a clean surface and gently push on the bottom of mold until the soap starts to release. Grab hold of the soap with a gloved hand, and allow soap to cure for 4-8 weeks. Note that some cp soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.

Cold Process/Oven Process Soap: Pour soap at trace into the mold cavities. Preheat oven to 170ºF then place mold in oven. Turn oven off, and keep soap in oven overnight. The next day remove mold from oven. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold. Allow soap to cure for 2 to 4 weeks.

Hot Process Soap: Scoop hot process soap into mold cavities. Gently tap the mold onto the counter to remove air pockets. Allow soap to cool and harden. (This can take up to 48 hours.) Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.

Solid Lotion: Pour melted lotion mixture into mold cavities. Allow mixture to solidify. Carefully remove solid lotion from mold by gently pulling the sides away from the solid lotion, and then push on the bottom of the mold until the solid lotion starts to release. Grab hold of solid lotion and carefully pull out of mold.

Care:
Hand wash in warm sudsy water.

Reviews

There are no reviews yet. Add a review